RCModelScout.

DPCAV

ELOGGER VIDEO OSD-PRO EXPANDER MODULE

The OSD Pro is a powerful, modular, and fully configurable video/audio On-Screen Display (OSD) device. It provides graphics and voice announcements that report a variety of alarms and data, including: acoustic variometer, electrical performance, Home Arrow, Return to Home, Failsafe, “RADAR”, waypoints, and many other features., how YOU configure the display. Here's a screen shot that shows some of the information that can be shown:, , All the data parameters that are supported by the eLogger can be displayed on the video display. Here are some examples:, , Specification Summary:, IMPORTANT NOTE: The OSD-Pro requires the EagleTree eLogger V3 or V4 module. To display navigation related data the GPS expander module is needed. These items are available separately (please see the related items links shown near the bottom of the page).,

DPCAV

SERVO DRIVER PRO (SERVO ADJUSTER / TESTER)

MX8340 Servo Driver Pro:, This compact servo signal emulator is used to test and evaluate R/C servos. It can also be used to program our, Features:,

DPCAV

900MHZ PRO-SERIES A/V TRANSMITTER, 500MW

For convenient installation, the TX905-PRO has a JST female power cable (compatible with several of our 3-cell LiPO batteries) and servo-style connectors on the camera and microphone cables. We've made it as ready to use as we could. Just add your compatible camera, battery, and A/V receiver (not included). Plus, a variety of optional accessories are available to make your installation as simple as possible:Click Me!, We also offer high quality 900MHz A/V receivers that work great with this transmitter. So if you don't already have a compatible receiver then be sure to check them out:click here, Non-USA (export) model has four RF channels:, 910MHz, 980MHz, 1010MHz, 1040MHz, Notice: Due to its high RF power, using the TX905-PRO in the USA and other countries will require an amateur/ham radio license (some countries may forbid its use). It is your responsibility to ensure that its use meets the requirements imposed by your government’s RF spectrum regulations. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them.,

DPCAV

CUSTOMIZED A/V CABLE FOR LAWMATE A/V TRANSMITTER, PRO-SERIES

camera cables. It is also the ideal A/V cable for use with an OSD telemetry system. Note: connecting its video connector to the EagleTree OSD-PRO system will require a male-male adapter cable, item, Referring to the photo at the bottom of the page, a summary of each connector is as follows:, , Tx:, This 4-pin connector plugs into the TM-121800 video transmitter. It includes a special polarity guard circuit that protects the transmitter from reverse battery voltage., Audio-In:, Male style servo cable, goes to optional microphone or OSD Audio-out port., Video-In:, Female style servo cable, goes to video camera or OSD Video-Out port. EagleTree OSD applications will also need the, 12V:, JST (BEC) style female cable. Goes to the 12VDC battery that powers the video transmitter and camera.,

DPCAV

FY-30A PRO R/C INERTIAL STABILIZER SYSTEM

Sold Out:, No longer available., How it works:, , Applications:, , The FY30A can be used in the following fixed wing models:, , Compare FY-30A to FY-20A:, Click Me!, Instruction Manual:, Click Me!, Firmware Update Instructions:, Click Me!, Firmware V1.20 Upgrade Files:, Click Me!, Firmware PC Application:, Click Me!, Manufacture's web site:, Click Me!, Sold Out:, No longer available.,

DPCAV

PRO-SERIES CABLE FOR GENERIC VIDEO CAMERA

DPCAV

MALE-MALE CABLE FOR EAGLETREE OSD-PRO

,

DPCAV

RSSI BUFFER FOR OSD PRO

Specifications / Features:, Installation Instructions:, Click Me!, Cable Pin-Out Information:, Click Me!, Installation Video:, Click Me!,

DPCAV

GUARDIAN STABILIZER (FOR OSD-PRO)

DPCAV

EAGLETREE OSD-PRO FPV SYSTEM, 3-PIECE KIT

As shown in the photo, the kit provides the following Eagle Tree components:, , This OSD will provide graphic data (and voice announcements) that report a variety of alarms and data, including: voltage, current, mAH, Watts, Home Arrow, Return to Home (RTH / RTL), RADAR, altitude, course (travel direction), ground speed, longitude, latitude, and navigation waypoints. You can expand the reported telemetry information even further by using low cost eLogger accessories, such as these:Click Me!, Here's a screen shot that shows some of the information that can be shown (temperature and RPM data requires optional accessories):, , All the data parameters that are supported by the eLogger can be displayed on your existing video display. Here are some examples:, , Here's some useful links to the manufacturer's web site:, Click Me,

DPCAV

PRO-SERIES CABLE FOR DPC-420A/480A/540A CAMERA

DPCAV

PRO-SERIES CABLE FOR DPC-171 & DPC-520S CAMERAS

,

DPCAV

FPV POD PAN & TILT KIT FOR EASYGLIDER PRO

The EasyPod kit comes with two R/C servos, so it is a fantastic value. The provided camera mounting plate will fit many popular CCD cameras including:, DPC-171, KX131, DPC-520S, KX171, KX191 and others. An optional back plate is available that converts this kit for use with the DPC-420A, DPC-480A, and DPC-540A OSD cameras (, The kit includes:, Laser cut plywood components, You'll need to supply:, Double sided servo tape, Assembly manual:, Part-1 (cockpit pod), Assembly manual:, Part-2 (pan/tilt module),

DPCAV

SHUTTERBUG PRO

DPCAV

PRO-SERIES CABLE FOR DPC-420A/480A/540A CAMERA (WITH FILTER)